长三角绿色技术创新网络结构特征与优化策略

绿色技术创新作为区域技术创新体系的重要组成部分,是维持区域发展可持续性、增强区域竞争优势的重要驱动力.基于区域一体化的研究视角,通过采集长三角绿色技术专利合作及绿色技术转移数据,运用Gephi复杂网络分析方法,对长三角绿色技术创新网络进行结构分析.结果 表明:(1)长三角绿色技术创新网络发育程度较低,大量城市在绿色技术创新网络中较边缘化;(2)绿色技术创新依赖创新主体间知识互动,地理邻近促进了创新合作行为的产生和知识的扩散;(3)长三角绿色技术创新网络"强-强联系"与"核心-边缘"结构特征明显,绿色技术专利合作网络呈现"一超多强"的多中心格局,绿色技术转让网络呈现单中心格局;(4)区域一体化下,长三角绿色技术创新网络兼具邻近性和等级性特征,不同类型城市参与创新网络应有差异;进而,提出长三角绿色技术创新网络优化策略.创新点在于:建立了区域一体化与技术创新网络的关联,探讨了绿色技术创新的空间组织形式,强调了地理邻近对于绿色技术创新网络的重要性.     

Combined toxicity of imidacloprid,acetochlor, and tebuconazole to zebrafish ( Danio rerio ): acute toxicity and hepatotoxicity assessment

Compound pollution refers to two or more kinds of pollutants with different properties, a pollutant from different sources, or the simultaneous existence of two or more different types of pollutants in the same environment. In this study, we aimed to investigate the individual and combined toxicity of the insecticide imidacloprid (IMI), the herbicide acetochlor (ACT), and the fungicide tebuconazole (TBZ) to zebrafish. The acute toxicity test results showed that the 96-h LC50 values of IMI, ACT, and TBZ were 276.84 (259.62–294.35) mg active ingredient (a.i.) L−1, 1.52 (1.34–1.74) mg a.i. L−1, and 8.16 (7.7–8.6) mg a.i. L−1, respectively. The combinations of IMI, ACT, and TBZ with toxicity ratios of 1:2:2, 1:4:4, 2:4:1, and 4:1:4 displayed synergistic toxic effects on zebrafish, while the toxicity ratios of 1:1:1, 1:1:2, 2:1:2, 2:2:1, and 4:2:1 of IMI, ACT, and TBZ, respectively, exhibited antagonistic toxic effects on zebrafish. The following experiments were performed with a toxicity ratio of 1:4:4 (IMI:ACT:TBZ). The activities of four enzyme biomarkers related to oxidative stress in the liver, catalase (CAT), superoxide dismutase (SOD), glutathione S-transferase (GST), and malondialdehyde (MDA) content were evaluated in each exposure group on days 7, 14, 21, and 28. Compared with those of the control group, the activities of CAT, SOD, and GST and the MDA content were significantly altered at different time points in the individual and combined exposure groups. Additionally, the activities of CAT, SOD, and GST and the MDA content were significantly altered in the combined group compared with those of the individual group after 14 days or 21 days of exposure. Therefore, it was confirmed that combined toxicity studies are indispensable in risk assessment.     

基于压力响应关系法的湖泊营养物基准制定

湖泊富营养化与氮、磷及有机物含量过高密切相关,建立数字型营养物基准能够防止富营养化对水体指定用途造成影响.太湖流域是我国华东地区经济腹地,近年来流域内湖泊水质每况愈下,对其基准研究可为湖泊治理提供依据.详细介绍了压力响应关系法制定湖泊营养物基准的步骤,并将此方法运用到太湖流域营养物基准制定研究中.为满足大多数水体指定用途,研究中将该流域湖泊基本功能确定为娱乐、永生生物栖息地及饮用水,以此构建流域概念模型.选择压力变量为总氮(TN)、总磷(TP)和有机物,响应变量为叶绿素a(chl-a).用非参数分析法和线性回归法分别建立压力-响应模型,通过2种方法相互验证得到TN、TP和CODMn基准分别为0.593、0.067和4.092 mg/L.     

可张孔曝气器曝气能耗试验研究

通过试验研究，总结出可张孔曝气阻力损失的影响因素，以优化产品的结构设计参数，降低产品在工程应用中的能耗，获取更好的经济效益。     

Exploration of Science Parks

1 DEVELOPMENT OF SCIENCE PARKSThe concept of science park originated in the US. Manyterms are used to describe science parks, such as researchpark, technology park, science centre, research centre,innovation centre, and with various combination of these(MacDonald, 1987). The first science park in the worldis Stanford Industrial Park established in 1951. In 1955,only seven companies were located in the park. By 1980there were ninety companies including Hewlett PackardCompany, whic…     

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs–water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge–water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation–separation performance was stable over a pH range of 3–11. The magnetization of the flocculants and oil droplets to form a flocculant–MNP–oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant–MNP–oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

不同裂解温度稻壳生物炭对阿特拉津的吸附行为及机制

为探究不同裂解温度下稻壳生物炭的结构和性质差异及其对阿特拉津（AT）的吸附作用机制和构-效关系,以稻壳为原料在300、500和700℃下制备稻壳生物炭（分别记为RH300、RH500、RH700）,通过电镜扫描、元素分析仪、比表面积分析仪和傅里叶变换红外光谱分析仪等对3种稻壳生物炭进行结构表征分析,并采用批量等温吸附法研究稻壳生物炭对AT的吸附特性.结果表明:裂解温度由300℃升至700℃时,稻壳生物炭中w（C）由48.81%升至64.67%,w（H）、w（N）和w（O）则由3.22%、1.45%和34.66%分别降至0.89%、0.92%和16.29%,原子比H/C、O/C和（O+N）/C值均降低.可见,随着裂解温度升高,稻壳生物炭的芳香性增强,亲水性和极性降低,且比表面积和孔体积增大,平均孔径减小.3种稻壳生物炭对AT的吸附均可用Freundlich和Langmuir两种等温吸附模型进行较好地拟合（R≥0.948,P < 0.01）,吸附作用及非线性程度与生物炭的比表面积（SSA）、芳香性（H/C）、亲水性（O/C）和极性〔（O+N）/C〕呈良好的指数关系,大小表现为RH700 > RH500 > RH300.稻壳生物炭对AT的吸附机制主要包括分配作用和表面吸附,分配作用强度与生物炭的极性和炭化程度有关;而表面吸附作用与AT的分子大小有关,3种稻壳生物炭对AT的表面吸附除表面覆盖外,还存在多层平铺、毛细管现象和孔隙填充等.研究显示,裂解温度是影响生物炭吸附有机污染物的重要因素,在综合考虑成本和制备工艺的同时,适当提高裂解温度可增强生物炭对有机污染物的吸附作用.      

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

小型水利工程项目对环境的影响分析与研究

水利工程是农业项目发展的重要组成部分之一,小型水利工程项目的建设对环境的影响不容忽视。因此,以环境影响因素为基础对水利工程项目进行详细的设计是保障工程有序进行的重要前提。环境影响评价工作直接影响水利工程建设方案的价值,是判断工程设计方案可行性的重要依据。通过对小型水利工程项目对环境的影响进行调查和分析以及对水利工程对周围环境带来的影响进行评析,分析和介绍了环境影响评价的原则和思想,进而分析了水利工程建设与环境之间的关系,希望为建设水利项目提供借鉴作用。